Why a Copper Wire Stripping Machine ? From Time to Time we Refurbish older Property´s, as we anyhow have to recycle all the scraped Material, Precious Metals and PVC Copper etc. we were Hording the Copper Cables, piping Material and others. Looking for a quick and convenient Solutions to get rid of our Precious Metal Copper with the best Profit. Conclusion “Copper Stripping” by Hand .. no way ! So the only Solution to get out the 5.50$ per Kg Copper was Peeling and Stripping copper Cable with an Automatic Wire Stripper like the Stripmeister. In this quick Tutorial, we will show and demonstrate how to make a small Automatic Wire Stripping machine to remove insulation from unnecessary copper wires.
Material List for Copper Wire stripping Machine
Tools List Copper Wire Stripper
Step 1:
Disassemble and Clean up Second Hand Rope Hoist, take mesures and Prepare Your Tools to get started with our Copper Wire Stripping machine.
Step 2:
Cut and Smooth the 40*40mm Extruded Aluminum Profile on the measures your Wirestripper needs!
Our case.:
2pcs 200mm
2pcs 150mm
Our case.:
2pcs 200mm
2pcs 150mm
Step 3:
Cut and Smooth the 20*20mm Square Pipe Profile!
Our case.:
2pcs 50mm
1pcs 60mm
Our case.:
2pcs 50mm
1pcs 60mm
Step 4:
Drilling Wholes/Drilling thread. For our Main Framing 40*40mm Profiles we Drill each end of the 200mm Long ones with a 6.8mm, afterwards we dive in with the M8 Thread Cutter.
Step 5:
Drilling 6mm Holes in 20*20 Alu. Square Pipe “Adjustable wire stripping Guide Blade”
Step 6:
Cut off the M6 threaded rod on 70mm if you use our Original Dimensions !
Prepare your Washer (Cutting Blade) in Advance look how you are going to Fit it in
Step 7:
Fix your washer on a M6 Screw with a M6 Nut, Sand it until you feel is Sharp enough.
Cut a second M6 Rod with about 150mm length, Assemble the adjustable copper stripping arm.
Step 8:
Drill a hole 6-22mm for the Drive Shaft in the Side of the Framing.
Drill a 6.2mm hole as well on the Top centered for the Adjustable Wire Stripping machine arm.
Step 9:
We made this Cone Disc wheels on a cnc machine but we advice you the Products Below, simply order ready made and assemble saves a lot of Time and Nerves. In the seen step we have used a Flex cutter to create some grip.
-
We Found a better Solution for the Cable Guide Roll, click on the Pic to get the Amazon Product.
-
Conic Wire Stripping Wheels
Step 10:
Final assembly, install and tie your conic Discs, Slide in the cutting device do not Forget to Drill a hole in your Table to Fix the Machine to the Table, it is really to advice as the Vibrations and uncontrolled movement might cause defects and malfunctions
Last Step Copper Wire Stripping Machine
And that´s it Guy´s, we hope you enjoyed our How to make a Automatic Wire stripping machine DIY. Any Ideas or reactions, please comment below, Like & Share
Do not miss our Other awesome DIY Projects
Visit our shop
This whole Article and Picture Documentation is made for Entertaining Purposes ONLY we will not take any Responsibility for the Content in this Article, you Follow this Copper Wire Stripping Machine DIY on your own Risk !!
RECENT POST
5/5
More Blogs DIY
Vortex Fire Tube Feuerrohr DIY
We are going to show you how to make a Vortex Fire Glass Tube including Drawings and a Part-List Download,
March 23, 2022
3 Comments
container wheels
Shipping Container Wheels Kit 20/40ft. | make your Tiny House mobile DIY
Shipping Container Wheels Kit 20/40ft. also called Kit roues | make your Tiny House mobile DIY #Tinyhouse #Containerhouse #Containerwheels Partlist
May 24, 2022
No Comments
Thanks for your blog, nice to read. Do not stop.